5 mm x 7 mm ceramic package smd vcxo, lvcmos / lvpecl / lvds i630 - series ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 10/17/12_e specifications subject to change without notice page 1 5 . 0 8 4.2 1.9 7.0 0.3 5.0 0.2 recommended pad layout 5.08 1.9 max. 2.0 dimension units: mm pin connection 1 voltage control 2 enable/disable or n/c 3 gnd 4 output 5 output or n/c 6 v dd frequency lvcmos lvpecl lvds 10 mhz to 225 mhz 10 mhz to 1500 mhz 10 mhz to 1500 mhz output level lvcmos lvpecl lvds voh=90% vdd min., vol=10 % vdd max. voh=vdd-1.03v max. (nom. load), vol=vdd-1.6v max. (nom. load) vod=(diff. output) 350mv typ. duty cycle lvcmos lvpecl lvds 50% 5% @ 50%vdd 50% 5% @ 50%* 50% 5% @ 50%* rise / fall time lvcmos lvpecl lvds 3.0 ns max. (90%/10%)* 0.6 ns max. (80%/20%)* 0.6 ns max. (80%/20%)* output load lvcmos lvpecl lvds 15pf 50 ? to vdd - 2.0 vdc rl=100 ? /cl=10pf frequency stability see table below supply voltage 3.3 vdc 10%, 2.5 vdc 5% current lvcmos = 25 ma max., lvpecl = 60 ma max. lvds = 35 ma max. linearity 10% max. pullability see table below control voltage 1.65 vdc 1.65 vdc @ 3.3v 1.25 vdc 1.25 vdc @ 2.5v input impedance 50k ? min. phase jitter (rms) at 12khz to 20 mhz 0.9 ps typical operating temp. range see table below storage -40 ? c to +100 ? c part number guide sample part number: i630?31ab9h2?155.520 package input voltage operating temperature stability (in ppm) pullabilty output enable / disable (pin 2) complimentary ouput (pin 5) ** frequency i630 3 = 3.3v 1 = 0 ? c to +70 ? c f = ? 20 b = ? 50 3 = lvcmos k = enable 1 = n.c. -155.520 mhz 6 = 2.5v 3 = -20 ? c to +70 ? c a = ? 25 c = ? 100 8 = lvds o = n/c 2 = output 2 = -40 ? c to +85 ? c b = ? 50 9 = lvpecl note: a 0.01 f bypass capacitor is recommended between v dd (pin 6) and gnd (pin 3) to minimize power supply noise. * measured as percent of waveform. ** available on lvds and lvpecl ouput only . product features applications small surface mount package xdsl ethernet/lan/wan fast sample delivery broadcast video optical modules frequencies to 1500 mhz wireless base stations clock and data recovery pb free/ rohs compliant sonet /sdh fpga/asic leadfree processing wimax/wlan backplanes server and storage gpon
5 mm x 7 mm ceramic package smd vcxo, lvcmos / lvpecl / lvds i630 - series ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 10/17/12_e specifications subject to change without notice page 2 ssb phase noise (typ.) offset 77.76 mhz 155.52 mhz 622.08 mhz 10hz 100hz 1khz 10khz 100khz -75 dbc/hz -105 dbc/hz -117 dbc/hz -123 dbc/hz -125 dbc/hz -62 dbc/hz -101 dbc/hz -112 dbc/hz -115 dbc/hz -118 dbc/hz -47 dbc/hz -79 dbc/hz -100 dbc/hz -104 dbc/hz -106 dbc/hz typical application: pb free solder reflow profile: *units are backward compatible with 240c reflow processes package information: msl = n.a. (package does not contain plastic, storage life is unlimited under normal room conditions). termination = e4 (au over ni over w base metalization).
5 mm x 7 mm ceramic package smd vcxo, lvcmos / lvpecl / lvds i630 - series ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 10/17/12_e specifications subject to change without notice page 3 tape and reel information: environmental specifications thermal shock mil-std-883, method 1011, condition a moisture resistance mil-std-883, method 1004 mechanical shock mil-std-883, method 2002, condition b mechanical vibration mil-std-883, method 2007, condition a resistance to soldering heat j-std-020c, tabl e 5-2 pb-free devices (except 2 cycles max) hazardous substance pb-free / rohs / green compliant solderability jesd22-b102-d method 2 (preconditioning e) terminal strength mil-std-883, method 2004, test condition d gross leak mil-std-883, method 1014, condition c fine leak mil-std-883, method 1014, condition a2, r1=2x10-8 atm cc/s solvent resistance mil-std-202, method 215 marking line 1: ilsi and date code (yww) line 2: frequency quantity per reel 1000 a 16 +/-.3 b 8 +/-.2 c 7.5 +/-.2 d 17.5 +/-1 e 50 / 60 / 80 f 180 / 250
|